Hart Communicator 475
- Obtain the parameters and output values of the sensor.Large screen (4 lines, 18 characters per line) is easy to operate, displayed in English, easy to set and change.
- Obtain the manufacturer information of the field HART meter. During the on-line monitoring and communication, the modulation signal does not interrupt the 4 ~ 20mA DC signal
- Read the output current and process variables of the meter. The HOM communicator uses the HART communication protocol, and the HART communicator can be used with most instruments that use the HART communication protocol.
- Understand the working status and fault information of the HART .HART intelligent equipment can be produced for testing, diagnosis and inspection meter.
Related Products
Clamp Meter Fluke 902fc
- Multiple Compatibility — This hard travel case is compatible with Fluke 902/Fluke 902 FC/ Fluke 373/374/375/376/Fluke 376 FC Electrical Voltage, Continuity and Current Tester.
- Super Materials — Instead of using the cheap materials, our case using the high quality and eco-friendly materials to prevent your fluke tester from the horrible smell. The outside covers is the nice 1680D fabric and the lining using the high-density EVA,which make it sturdy and durable.
Clamp Meter Fluke 376fc
- Clamp Meter
- 18-inch iFlex Flexible Current Probe (376 FC only)
- TPak Magnetic Hanging Strap (376 FC only)
- Soft Carrying Case
- TL75 Test Leads
- Two AA Alkaline Batteries
- User Manual
- Safety Information Sheet
FLuke 373 Clamp Meter
Welding Gauge
- angle of preparation 0 to 60°
- misalignment (high – low)
- fillet weld throat size
- fillet weld length
- 2mm (0.79”) edge roundness test
- excess weld metal (capping size)
- depth of undercut
- depth of pitting
- general linear measurements up to 60mm (2”)
Measuring Tapes
Long Tape Measure features a blade-release button and a 5-to-1 gear ratio for fast blade rewinds for efficiency. The long tape’s stainless-steel crank arm provides durability for demanding job-sites. A spring-loaded carabiner attachment offers great portability.
Sounding Tape
- Material: Oil gauging sounding tape made of stainless steel with a chromed brass drawing weight attached. strong corrosion resistance, which will not be affected with rust, strong case resists physical impact to help protect the tape measure, they can be use in many place.
- Different size to choose: Measurement tapes have 10M/33ft, 15M/49ft, 20M/66ft, 30M/98ft, according to the actual things, you can choose the suitable size.
Barton Recorder
chart recorder that has been used widely in
gas transmission and distribution fields because of its accurate
calibration, even under extreme variations in static pressure and
ambient temperatures.
available in 1 to 4 pen configurations (DP+3 additional
pens). The additional pens can be used to record temperature and
supplemental pressure data.
Fluke Insulation tester 1555
The Fluke 1555 insulation resistance testers offer digital insulation testing up to 10kV, making it ideal for testing a wide range of high voltage equipment including switch gear, motors, generators and cables. Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating. With measurement storage and PC interface, the 1555 are perfect tools for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur.
Fluke 59 Max Infrared Thermometer
- Precise laser technology for more accurate measurements
- Large, easy to read backlit LCD display for easy viewing
- Small and lightweight design fits easily fits into your tool box
- IP40 rated for extra protection
Fluke infrared thermometer 561
- battery LR6 AA 1,5V x2
- 3 levels of emissivity adjustment
- contact or non-contact temperature measurement
- HOLD function
- laser sight
- low battery indicator
- MIN/MAX/MEDIUM function
- possibility of typical thermocouples connection
- case
- test probe x1
- battery LR6 AA 1,5V x2
Fluke infrared thermometer 568
#06343 – Handy device for measuring the temperature of hard-to-reach, live or dangerously hot robjects. It also provides the possibility of contact measurement. Equipped with a laser viewfinder that allows you to track the measurement point, a graphic display and the function of recording the measurement results. The recorded data can be analyzed by using the included software.
The set includes a pyrometer, FlukeView Forms software, a USB port, a K-type probe, a portable bag and 2x AA batteries – https://www.atel-electronics.com/produkt.php?hash=06343





















