Barton Recorder
Highlights:
chart recorder that has been used widely in
gas transmission and distribution fields because of its accurate
calibration, even under extreme variations in static pressure and
ambient temperatures.
available in 1 to 4 pen configurations (DP+3 additional
pens). The additional pens can be used to record temperature and
supplemental pressure data.
Bore Gauge
Highlights:
- Dial bore gauge with a measuring range of 2″-6″ and a graduations of 0.001″.
- Self-Centering extender bore gauge for accurate and reliable cylinder bore measurements.
- Two-point contact system to measure hole diameters and detect geometry abnormalities.
- Portable case is provided for easy organization and storage.
- WARM TIP: Before measuring, be sure to adjust the pointer of the dial indicator to the “0” setting.
Clamp Meter Fluke 323
Highlights:
The Fluke 323 is best suited for current measurements up to 400A in confined cable locations.
When measuring current the Fluke 323 clamp meter ensures that you can carry out your measurements without damaging the circuit thanks to the integrated jaws. Simply clamp the jaws around the conductor you are testing and the 323 will provide an accurate reading of AC current instantly. To ensure further measurements are accurate as possible on irregular loads the 323 comes with true RMS technology that enhances the readings taken. AC current – range of 400A
- AC voltage – range of 600V
- DC voltage – range of 600V
- Resistance – ranges of 400Ω and 4000Ω
- Continuity – range of <70Ω
Clamp Meter Fluke 376fc
Highlights:
- Clamp Meter
- 18-inch iFlex Flexible Current Probe (376 FC only)
- TPak Magnetic Hanging Strap (376 FC only)
- Soft Carrying Case
- TL75 Test Leads
- Two AA Alkaline Batteries
- User Manual
- Safety Information Sheet
Clamp Meter Fluke 902fc
Highlights:
- Multiple Compatibility — This hard travel case is compatible with Fluke 902/Fluke 902 FC/ Fluke 373/374/375/376/Fluke 376 FC Electrical Voltage, Continuity and Current Tester.
- Super Materials — Instead of using the cheap materials, our case using the high quality and eco-friendly materials to prevent your fluke tester from the horrible smell. The outside covers is the nice 1680D fabric and the lining using the high-density EVA,which make it sturdy and durable.
FLuke 373 Clamp Meter
Highlights:
This clamp meters offers improved performance perfect for many ac only current measurement situations. Featuring true-rms ac voltage and current measurements, and resistance measurement up to 6000Ω with continuity detection.
Fluke 375fc Clamp Meter
Highlights:
The Fluke 375 FC True RMS AC/DC Clamp Meter is a smart device that boasts Bluetooth connectivity to the user’s smartphone/tablet via the Fluke Connect app. This allows it to project readings directly to the user’s smartphone or tablet where data can be analysed and forwarded. An additional advantage of Fluke Connect is that the user can leave a meter connected to a system and then observe outputs from a safe distance.
As far as measurement is concerned, the Fluke 375 FC can take accurate readings for AC/DC current (600A), AC/DC voltage (1000V), frequency (500Hz), resistance (60kΩ) and capacitance (1000µF). There is also an option for continuity testing whilst true RMS measurement helps keep AC readings accurate. Inrush measurement allows readings to be taken for current during system start-up and a low pass filter helps accurately assess motor drives.
Fluke 59 Max Infrared Thermometer
Highlights:
- Precise laser technology for more accurate measurements
- Large, easy to read backlit LCD display for easy viewing
- Small and lightweight design fits easily fits into your tool box
- IP40 rated for extra protection
Fluke 59 MAX+ Compact Infrared Thermometer
Highlights:
- Accuracy: 2.0 degree f; 1.5 percent of reading or 3.0 degree f, whichever is greater, above 86 degree and from 50 degree to 14 degree f
- Battery: 9V battery (1)
- Display type: lcd
- Distance to target size ratio (d: s): 10: 1
- Emissivity: adjustable
Fluke infrared thermometer 561
Highlights:
Power supply
- battery LR6 AA 1,5V x2
Measuring instrument features
- 3 levels of emissivity adjustment
- contact or non-contact temperature measurement
- HOLD function
- laser sight
- low battery indicator
- MIN/MAX/MEDIUM function
- possibility of typical thermocouples connection
Standard equipment
- case
- test probe x1
Battery/ rechargeable battery
- battery LR6 AA 1,5V x2
Gross weight959.2 g
Fluke infrared thermometer 568
Highlights:
#06343 – Handy device for measuring the temperature of hard-to-reach, live or dangerously hot robjects. It also provides the possibility of contact measurement. Equipped with a laser viewfinder that allows you to track the measurement point, a graphic display and the function of recording the measurement results. The recorded data can be analyzed by using the included software.
The set includes a pyrometer, FlukeView Forms software, a USB port, a K-type probe, a portable bag and 2x AA batteries – https://www.atel-electronics.com/produkt.php?hash=06343