Disposable Nose Mask 3M
- enhanced performance
- P2 class
- protects against dust
Related Products
Elbow
Heavily used within the plumbing industry, water and gas will flow through in a tightly sealed construction. These 90 degree elbow fittings are made from a durable 316 stainless steel to ensure a simple and secure connection for pipe and hose work. All models are highly reliable and excellent quality.
Reducer Nipples 2” X 3″
- Combination (KC) Nipple Fitting Reducer
- 2″ Hose Shank x 3″ Male NPT Threads
- Made of 304 Stainless Steel
Nuts, Bolts and Washers
set available in:
10mm, 12mm, 14mm, 16mm, 20mm, 25mm and 30mm,
25mm, ETC.
Hose Coupling 3/4″/ 1/2″ /1″
- hose joint quick connector is easy to connect and loosen, install and remove the hose.
- Very suitable for your faucet, hose, quick connector,
- Car wash water gun. Flowers, plants, lawns,
- Agricultural irrigation, villa irrigation, industrial irrigation!
- Easy installation! Rugged and durable, long service life, widely accepted by users.
Butterfly Valves 3”
Ductile Iron, ASTM A395 Gr. 60-40-18
Disc: 304 Stainless Steel, ASTM A351 Gr. CF8M
Seat: Resilient, EPDM seat
Mallet Hammer 2”
Stanley 1-51-104 – Tough rubber head non-marring. Lacquered hardwood handle.
DESCRIPTION
Tough Rubber Head Non-Marring
Lacquered Hardwood Handle
- Handle material: Synthetic
- Head diameter (mm): 60
- Head material: Rubber
- Head weight (g): 510
Various Valves
We are dealer, stockist, supplier & distributor of a comprehensive range of industrial valves in Nigeria.
Gate Valves
Globe Valves
Knife Gate Valves
Needle Valves
Etc.
Equal Tee joints 2”
This fitting has a nominal bore of 2″ or 50mm and the overall fitting diameter is 60mm.
When installing threaded pipe the joint should be made using a suitable thread
Shackles 1/2, 5/8, 3/4
Minimum safety factor: 6
Heat treatment: hardening and tempering.
Traceability code on both pin and body.
Laboratory tests:
Chemical analysis.
Metallographic analysis.
Tensile test.
Fatigue test (min. 20,000 cycles).
Proof load test (2 x WLL).
Recently Viewed
Fluke 59 MAX+ Compact Infrared Thermometer
- Accuracy: 2.0 degree f; 1.5 percent of reading or 3.0 degree f, whichever is greater, above 86 degree and from 50 degree to 14 degree f
- Battery: 9V battery (1)
- Display type: lcd
- Distance to target size ratio (d: s): 10: 1
- Emissivity: adjustable
Enerpac Hydraulic Pumps
Enerpac high-pressure, two-speed lightweight hydraulic hand pump is for lifting, bolting, or applying pressure in construction, manufacturing, and maintenance and repair applications. The nylon-covered aluminum base, glass-filled nylon reservoir, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The hand pump has a pressure rating of 10,000 pounds per square inch (psi) and an internal pressure relief valve that protects against overloading the pump. The two-speed operation requires up to 78% fewer handle strokes than single-speed hydraulic hand pumps, and the handle locks into place for secure transport. The pump has a 3/8″ National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately).
Hydraulic Wire Rope Cutter
This cutter can cut steel core aluminum stranded wire ≤ φ18MM, copper and aluminum cable ≤ φ20MM, wire rope ≤ φ20MM.
Fluke 59 Max Infrared Thermometer
- Precise laser technology for more accurate measurements
- Large, easy to read backlit LCD display for easy viewing
- Small and lightweight design fits easily fits into your tool box
- IP40 rated for extra protection
Full Body Harness Belts
Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. Energy absorption system with 30mm Polymide webbing and PVC container case reduces the force of impact during fall. Each of our products is Individually inspected.
Lightweight and Comfortable: Our roofers safety harness fits a weight range of 130-310lbs. It was felt light and comfortable without being restrictive when you keep focusing on your working safety at height. You can wear it all day long.
Fluke infrared thermometer 568
#06343 – Handy device for measuring the temperature of hard-to-reach, live or dangerously hot robjects. It also provides the possibility of contact measurement. Equipped with a laser viewfinder that allows you to track the measurement point, a graphic display and the function of recording the measurement results. The recorded data can be analyzed by using the included software.
The set includes a pyrometer, FlukeView Forms software, a USB port, a K-type probe, a portable bag and 2x AA batteries – https://www.atel-electronics.com/produkt.php?hash=06343
Hose Coupling 3/4″/ 1/2″ /1″
- hose joint quick connector is easy to connect and loosen, install and remove the hose.
- Very suitable for your faucet, hose, quick connector,
- Car wash water gun. Flowers, plants, lawns,
- Agricultural irrigation, villa irrigation, industrial irrigation!
- Easy installation! Rugged and durable, long service life, widely accepted by users.
Manual Vertical Drum Lifter / Dispenser
One person operation to save time, reduces spilling waste and improves productivity. Simply attach or hang lifter on hook from an overhead crane/hoist, cinch saddle around drum, and raise to desired height and position. Lift, transport and pour from open and closed head drum. Ideal for low lever pouring and dumping operations. Positive tilt lock on drum saddle to hold drum upright in transit.
Fluke infrared thermometer 62max
The Fluke 62 MAX infrared thermometers are everything you expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance.
Small in size, extremely accurate and yet easy to use .
IP54 rated for dust and water resistance.
Precise yet rugged enough to take a 3-meter drop.
Air Hose (3/4”)
Air Hose (3/4”)
- 3/4″ various colors Compressor Hose
- Complete with or without ‘Q’ couplings
- various length
- 300 PSI Rating
Earth Clamp/ Electrode holder
- Light Weight
- Made in India
- For welding works
- For Fabrication Work
- Combo, 1 Electrode Holder + 1 Earthing Clamp Without Cable wire
High Clemco Outer Lens 04361
Protect your vision with the durable High Clemco Outer Lens 04361. Designed for Clemco helmets, this lens ensures safety and clear visibility in abrasive blasting environments.



































