Hi-Lo Gauge
- Measures Internal alignment of pip after fit-up/alignment
- Measures Internal Misalignment of pipe before and after tacking
- Measurement scale both Inch and Metric Solid Stainless Steel, Rust free, Sturdy with Caring case and User Manual
- Measure Bevel on end Preparation Measure Scribe Line, Socket welds
- Measure the crown Height of welds Measure Fillet weld size
Related Products
Fluke infrared thermometer 62max
The Fluke 62 MAX infrared thermometers are everything you expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance.
Small in size, extremely accurate and yet easy to use .
IP54 rated for dust and water resistance.
Precise yet rugged enough to take a 3-meter drop.
Hart Communicator 475
- Obtain the parameters and output values of the sensor.Large screen (4 lines, 18 characters per line) is easy to operate, displayed in English, easy to set and change.
- Obtain the manufacturer information of the field HART meter. During the on-line monitoring and communication, the modulation signal does not interrupt the 4 ~ 20mA DC signal
- Read the output current and process variables of the meter. The HOM communicator uses the HART communication protocol, and the HART communicator can be used with most instruments that use the HART communication protocol.
- Understand the working status and fault information of the HART .HART intelligent equipment can be produced for testing, diagnosis and inspection meter.
Fluke infrared thermometer 561
- battery LR6 AA 1,5V x2
- 3 levels of emissivity adjustment
- contact or non-contact temperature measurement
- HOLD function
- laser sight
- low battery indicator
- MIN/MAX/MEDIUM function
- possibility of typical thermocouples connection
- case
- test probe x1
- battery LR6 AA 1,5V x2
Fluke 59 Max Infrared Thermometer
- Precise laser technology for more accurate measurements
- Large, easy to read backlit LCD display for easy viewing
- Small and lightweight design fits easily fits into your tool box
- IP40 rated for extra protection
Welding Gauge
- angle of preparation 0 to 60°
- misalignment (high – low)
- fillet weld throat size
- fillet weld length
- 2mm (0.79”) edge roundness test
- excess weld metal (capping size)
- depth of undercut
- depth of pitting
- general linear measurements up to 60mm (2”)
Fluke 375fc Clamp Meter
The Fluke 375 FC True RMS AC/DC Clamp Meter is a smart device that boasts Bluetooth connectivity to the user’s smartphone/tablet via the Fluke Connect app. This allows it to project readings directly to the user’s smartphone or tablet where data can be analysed and forwarded. An additional advantage of Fluke Connect is that the user can leave a meter connected to a system and then observe outputs from a safe distance.
As far as measurement is concerned, the Fluke 375 FC can take accurate readings for AC/DC current (600A), AC/DC voltage (1000V), frequency (500Hz), resistance (60kΩ) and capacitance (1000µF). There is also an option for continuity testing whilst true RMS measurement helps keep AC readings accurate. Inrush measurement allows readings to be taken for current during system start-up and a low pass filter helps accurately assess motor drives.
Clamp Meter Fluke 376fc
- Clamp Meter
- 18-inch iFlex Flexible Current Probe (376 FC only)
- TPak Magnetic Hanging Strap (376 FC only)
- Soft Carrying Case
- TL75 Test Leads
- Two AA Alkaline Batteries
- User Manual
- Safety Information Sheet
Fluke infrared thermometer 568
#06343 – Handy device for measuring the temperature of hard-to-reach, live or dangerously hot robjects. It also provides the possibility of contact measurement. Equipped with a laser viewfinder that allows you to track the measurement point, a graphic display and the function of recording the measurement results. The recorded data can be analyzed by using the included software.
The set includes a pyrometer, FlukeView Forms software, a USB port, a K-type probe, a portable bag and 2x AA batteries – https://www.atel-electronics.com/produkt.php?hash=06343
Sounding Tape
- Material: Oil gauging sounding tape made of stainless steel with a chromed brass drawing weight attached. strong corrosion resistance, which will not be affected with rust, strong case resists physical impact to help protect the tape measure, they can be use in many place.
- Different size to choose: Measurement tapes have 10M/33ft, 15M/49ft, 20M/66ft, 30M/98ft, according to the actual things, you can choose the suitable size.
Measuring Tapes
Long Tape Measure features a blade-release button and a 5-to-1 gear ratio for fast blade rewinds for efficiency. The long tape’s stainless-steel crank arm provides durability for demanding job-sites. A spring-loaded carabiner attachment offers great portability.
Clamp Meter Fluke 902fc
- Multiple Compatibility — This hard travel case is compatible with Fluke 902/Fluke 902 FC/ Fluke 373/374/375/376/Fluke 376 FC Electrical Voltage, Continuity and Current Tester.
- Super Materials — Instead of using the cheap materials, our case using the high quality and eco-friendly materials to prevent your fluke tester from the horrible smell. The outside covers is the nice 1680D fabric and the lining using the high-density EVA,which make it sturdy and durable.
Clamp Meter Fluke 323
The Fluke 323 is best suited for current measurements up to 400A in confined cable locations.
When measuring current the Fluke 323 clamp meter ensures that you can carry out your measurements without damaging the circuit thanks to the integrated jaws. Simply clamp the jaws around the conductor you are testing and the 323 will provide an accurate reading of AC current instantly. To ensure further measurements are accurate as possible on irregular loads the 323 comes with true RMS technology that enhances the readings taken. AC current – range of 400A
- AC voltage – range of 600V
- DC voltage – range of 600V
- Resistance – ranges of 400Ω and 4000Ω
- Continuity – range of <70Ω
Recently Viewed
Electric Winches 1/2 Ton
Electric Winches 1/2 Ton
The Product We Produced Is In Compliance With The Nationalstandard.
2) The Design Is Reasonable
3) The Materials Are Of Good Quality,
4) The Structure Is Advanced.
5) The Appearance Is Beautiful And The Size Is Compact.
Graco 246240 Silver Plus Airless Spray Gun
The Graco 246240 Silver Plus Airless Spray Gun offers unmatched performance and durability for professional and DIY spraying projects. Lightweight, ergonomic, and built to last, it ensures precise finishes on various surfaces, making it perfect for residential, commercial, and industrial applications.
Orion Safety Flare Gun
- 12-Gauge Safety Launcher – hammer safety lock, corrosion-resistant with lifetime warranty.
- Bandolier – holds up to 6 high-performance signals
- 4, 12-Gauge HP Red Aerial Flares –USCG approved day or nighttime signal, altitude up to 500 feet, brightness up to 16,000 candela, burn time up to 7 seconds each.
Stainless Steel Polish Spray
Polishes and protects all stainless steel surfaces in one step
The spray clings to vertical surfaces and leaves a light, non-greasy film that resist fingerprints and marking
Does not contain harmful chemicals and is safe to use in food preparation areas
Teflon Sheet 0.5mm – 6mm 1msq
SPECIFICATION
| Item | Thickness | Length& Width |
| Molded sheet | 3~~100 mm | Length*Width 300*300 mm——2000*2000 mm |
| Skived sheet | 0.2~~6.5 mm | Width 100—2700 mm Length: by roll |
| PTFE sheet | 1/64~1/4 | 48*48 , 60*60 |
Wet Film Thickness Meter
- In this welding gauge kit, it include a pack of wet film comb, a pack of wire metal sheet thickness gauge, and a pack of dual-sided wire cable sheet gauge total 3 pack. They are well packed in a plastic box, easy for carry and store.
- High Quality: All the welding gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust.
Lifting Belt 2×3/3×4/5×5
polyester lifting belts are continuous loops made by connecting the ends of the webbing to the joint pads. They are extremely versatile as the design allows for rotation of bearing points, avoiding one constant bearing point and thereby increasing useful life. They are ideal for use with all three bindings vertical, horizontal and chokers. Polyester harnesses are renowned for their versatility, weight, strength and non-slip material. crane lifting belts are made from industry grade polyester which is more durable an
Sledge Hammer Steel 8kg
Special non sparking and anti-magnetic Copper-Beryllium alloy.
• For safety purposes,they uses wooden handles to prevent any risk of sparks. This is not the case of certain bi-material plastic handles.
• To avoid any risk of sparks, the design of the hammer heads is specific, without sharp edges.
Hack Saw Frame
|
Type of tool
|
hacksaw | |
|
Tools application
|
for fretsaw blades | |
|
Tools features
|
“Ergo” design | |
|
Kit contents
|
blade |
Full Body Harness Belts -Camp Safety
A simplified version of Camp Safety’s GT harness equipped with non-openable auto-locking buckles on the leg loops for fast, easy, secure adjustment. GT construction follows the findings of their “SOSPESI” research program which gave them new insights on suspension trauma. The padding uses variable thicknesses and stiffness to provide the right amount of support and comfort for every part of the body. Ventral attachment features two loops: the upper loop is for attaching a chest harness and chest ascender and the lower loop holds the ventral D-ring for attaching lanyards and rope tools. 5 aluminum alloy
Hydraulic Cylinder Jacks 10 Ton
Enerpac RC-101 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity. This reliable hydraulic cylinder is perfect for all your heavy-duty lifting and pressing needs. With a single acting design, this cylinder provides smooth and precise operation.
The spring return feature ensures quick retraction, saving you time and effort. The 1-inch stroke allows for efficient lifting or pressing in various applications. The Enerpac RC-101 hydraulic cylinder boasts a 10-ton capacity, making it ideal for industrial, construction, and automotive use.
Reducer Nipples 2” X 3″
- Combination (KC) Nipple Fitting Reducer
- 2″ Hose Shank x 3″ Male NPT Threads
- Made of 304 Stainless Steel
Tap and Die set 3-12mm
Each selection includes sets of two taps per dimension: taper and bottoming.






































