Hose Coupling 3/4″/ 1/2″ /1″, etc.
Hose Coupling 3/4″/ 1/2″ /1″
- hose joint quick connector is easy to connect and loosen, install and remove the hose.
- Very suitable for your faucet, hose, quick connector,
- Car wash water gun. Flowers, plants, lawns,
- Agricultural irrigation, villa irrigation, industrial irrigation!
- Easy installation! Rugged and durable, long service life, widely accepted by users.
Related Products
Weco Union
Unions are all steel constructed including precisely manufactured ball-cone (male-to-female) seats.
Weco Union 4”
| Manufacturing Process: | Forging |
|---|---|
| Surface Treatment: | Sand Blast |
| Operation Pressure: | High Pressure |
| Material: | Alloy |
Equal Tee joints 2”
This fitting has a nominal bore of 2″ or 50mm and the overall fitting diameter is 60mm.
When installing threaded pipe the joint should be made using a suitable thread
Nuts, Bolts and Washers
set available in:
10mm, 12mm, 14mm, 16mm, 20mm, 25mm and 30mm,
25mm, ETC.
Hose Clamps 3”
Various sizes of Stainless steel hose clamp .
Elbow
Heavily used within the plumbing industry, water and gas will flow through in a tightly sealed construction. These 90 degree elbow fittings are made from a durable 316 stainless steel to ensure a simple and secure connection for pipe and hose work. All models are highly reliable and excellent quality.
Mallet Hammer 2”
Stanley 1-51-104 – Tough rubber head non-marring. Lacquered hardwood handle.
DESCRIPTION
Tough Rubber Head Non-Marring
Lacquered Hardwood Handle
- Handle material: Synthetic
- Head diameter (mm): 60
- Head material: Rubber
- Head weight (g): 510
Reducer Nipples 2” X 3″
- Combination (KC) Nipple Fitting Reducer
- 2″ Hose Shank x 3″ Male NPT Threads
- Made of 304 Stainless Steel
Shackles 1/2, 5/8, 3/4
Minimum safety factor: 6
Heat treatment: hardening and tempering.
Traceability code on both pin and body.
Laboratory tests:
Chemical analysis.
Metallographic analysis.
Tensile test.
Fatigue test (min. 20,000 cycles).
Proof load test (2 x WLL).
Butterfly Valves 3”
Ductile Iron, ASTM A395 Gr. 60-40-18
Disc: 304 Stainless Steel, ASTM A351 Gr. CF8M
Seat: Resilient, EPDM seat
Disposable Nose Mask 3M
- enhanced performance
- P2 class
- protects against dust
Recently Viewed
Fluke 59 Max Infrared Thermometer
- Precise laser technology for more accurate measurements
- Large, easy to read backlit LCD display for easy viewing
- Small and lightweight design fits easily fits into your tool box
- IP40 rated for extra protection
Digital Humidity Gauge -Terminator
- Brand: Terminator
- Description: Indoor and Outdoor Temperature and Hygrometer With Clock 4in1
G Clamp 8”/10”/12”
Capacity: 0 to 250 mm and 0 to 9″7/8.
• Presentation: galvanised – burnished screw.
Emergency Eyewash Shower Station
- tainless steel bowl,with cover, dustproof, double mouth.
- This model is made of 304 stainless steel with a thickened mounting bracket that can be mounted to a wall. The nozzle flow rate is 12L per minute, the water pressure requirement is 0.2-0.4mpa
- Use ball valves to control spray and wash eyes, respectively.Easy to operate, fast opening and closing, reliable sealing.
- The rinsing nozzle of the punching nozzle is a soft foam-like water stream, which improves the cleaning efficiency by 50% compared with ordinary eyewash nozzles.
- Super chemical resistance to acids, alkalis, salts, oils, etc.
Earth Clamp/ Electrode holder
- Light Weight
- Made in India
- For welding works
- For Fabrication Work
- Combo, 1 Electrode Holder + 1 Earthing Clamp Without Cable wire
220V Kenpo Portable Explosion Proof Ventilation Fan
| Material: | Stainless Steel |
|---|---|
| Usage: | for Air Conditioner, for Manufacture |
| Flow Direction: | Axial Flow |
| Pressure: | Medium Pressure |
| Certification: | CE |
| Name: | 220V Kenpo Portable Explosion Proof Ventilation Fa |
Non-Spark / Plastic Shovels
This shovel is perfect for a day out in the garden, beach or sand box. allow your child dig up the sand with this plastic shovel. it is designed safe for children.
a pack of 4 with different colors-orange, green, pink and yellow
Product dimension-50*11cm
Cable Cutter (Manual) B/S
- Cable Cutter (ratchet action) for steel wire armoured cables (SWA cable) black lacquered, handles with multi-component grips
Sturdy.
Easy to use.
Stable.
Cuts through steel wire armoured cables with a diameter of up to 45 mm / 380 mm² (e.g. 4 x 95 mm²) using one or two-handed operation.
Simple handling due to low weight (800 g) and compact design (315 mm length) – can also be used in confined areas.
Precision-ground blades and induction-hardened cutting edges cut smoothly and neatly without crushing.
Innovative high leverage three-stage ratchet-drive.
Support area for putting down the pliers when cutting.
Not suitable for cutting ACSR cable and wire rope!.
cutter head: special high-grade tool steel, forged, oil-hardened























