Chipping Hammer Iron
With wooden handle
- Handle length: 380 mm
Related Products
Tap and Die set 3-12mm
Each selection includes sets of two taps per dimension: taper and bottoming.
Heating Gun
- DEWALT cordless heat gun has up to 990 degrees Fahrenheit/ 532 degrees Celsius max output temperature
- Up to 42 minutes of runtime per charge
- 6.7CFM
- Lock-on button for ease of use
- Lock-off trigger to engage manual operation
- LED to brighten dark areas when tool is in use
Jet Chisel Guns
For chiseling or smoothing welds, castings and other materials
2. Adjust to the contour of any surface automatically
3. The chisel can reach into corners, cuivatures, and uneven surfaces, making it a tool no shop should be without.
4. A short hose and quick coupler are attached as standard accessories.
Aluminium Hook
- Material: Anodised aluminium alloy
- Colour: Silver
- MBS: 25kN
- Gate opening: 21mm
- Length: 135mm
- Width: 68mm
- Weight: 144g
Pointing Extractor
- 125mm C-Tec Brick Raking Cowl
- 125 x 6.4mm Diamond Raking Blade
- Tuff Key Flange Nut Spanner
- Safety Glasses
- Safety Gloves
- Lockable Toolbox
Emery Cloth (Smooth and Rough) 2”
- Brown Emery Cloth Roll for Sanding
- TYPE: 120 Grit possesses a coarse-to-medium abrasive that’s commonly used for stain, rust and scale removal, along with smoothing out rough edges and surfaces
- MATERIALS: For use on all hardwoods, ferrous metals, aluminum, brass, bronze, leather, and most alloys
- APPLICATIONS: Whether at home or in a professional workshop setting, this sanding paper roll is perfect for an assortment of metalwork, woodworking, automotive, plumbing, knifemaking, DIY and general purpose projects
Grease Guns
- Grease gun can power through clogged grease fittings with a motor that delivers up to 10,000 max PSI
- High-volume pump of the battery grease gun pushes up to 5.0 oz/min high-flow applications.
- The battery operated grease gun can control grease flow with the variable speed trigger
- Reach hard to access grease fittings with the 42-inch flexible hose
- Locate hard to see grease fittings in dark work areas with the bright LED
- Integrated no-mar foot design allows operators to rest the tool on flat surfaces
- Air-bleeder valve assists in pump priming after cartridge changes
Pipe Wrench (6″, 12″, 18, 24″ 36, 48,60”)
| Material | Aluminum |
| Item Package Quantity | 1 |
| Finish Type | Powder Coated |
| Operation Mode | Hydraulic |
Torque Wrenches ( 1/2”, 3/4” ) 380/700NM
1/2″ – 3/8″ torque wrench
- Capacity: 28 – 210 Nm
- Drive Square: 1/2″ – 3/8″
- Extension: 120 mm
- Material: Cr-V
Airless Spray Gun
1000 ml suction hvlp spray gun with baionet lock, aluminum cup, made with cnc machine, without o-ring, with stainless steel nozzle and needle brass air cap, alum clamp and knobs, chrome plated spray gun body, male thread fitting 1/4″ hvlp = high volume, low pressure
- Capacity: 1000 cc
- Nozzle: ø 1,4mm
- Packaging type: Box
- Working pressure: 2,5 – 3 bar
Brass Hammer 8kg
Full brass execution.
Protective material.
- Handle interchangable: No
- Shock absorbing effect: No
Screw Extractor Big size
KS TOOLS Screw extractor set (6 pcs) – 1
KS TOOLS 150.1330 – SCREW EXTRACTOR SET (6 PCS)
Visit the KS TOOLS Store
For screws from M3 – M18. Enable the loosening of screws and bolts with turned off heads. Conical tapered spiral. In durable plastic case. Composition: – 1 x 150.1330-1 – Screw extractor…
Read more
Mister Worker® Price
$ 17.47
VAT Excluded
?
Worldwide Shipment
Worldwide Shipment
Official Warranty
Official Warranty
AVAILABILITY
150.1330
EAN: 4042146134740
Shipped in 5-8 working days.
$ 17.47
1
ADD TO CART
Description
For screws from M3 – M18.
Enable the loosening of screws and bolts with turned off heads.
Conical tapered spiral.
In durable plastic case.
Composition:
– 1 x 150.1330-1 – Screw extractor M3-M6
– 1 x 150.1330-2 – Screw extractor M6-M8
– 1 x 150.1330-3 – Screw extractor M8-M11
– 1 x 150.1330-4 – Screw extractor M11-M14
– 1 x 150.1330-5 – Screw extractor M14-M18
– 1 x 150.1330-6 – Screw extractor M18-M24
Jaw Type: Conical
Packaging: Plastic box
Profile size: M3 / M24
Weight [g]: 64 g
Recently Viewed
Lifting Clamps
Cam safety lock for easier steel sheet insertion and safe gripping.
Identification plate with serial number and batch number.
Safety factor: 3:1.
Minimum WLL is 10% of maximum WLL.
Hart Communicator 475
- Obtain the parameters and output values of the sensor.Large screen (4 lines, 18 characters per line) is easy to operate, displayed in English, easy to set and change.
- Obtain the manufacturer information of the field HART meter. During the on-line monitoring and communication, the modulation signal does not interrupt the 4 ~ 20mA DC signal
- Read the output current and process variables of the meter. The HOM communicator uses the HART communication protocol, and the HART communicator can be used with most instruments that use the HART communication protocol.
- Understand the working status and fault information of the HART .HART intelligent equipment can be produced for testing, diagnosis and inspection meter.
Digital Surface Profile Gauge Weld-Tech
The Elcometer 224 integral profile gauge provides the very latest in surface profile measuring technology for measuring profile on flat surfaces. Fast, accurate and very user friendly, the Elcometer 224 is available with or without memory and Bluetooth®.
Available in two different models, model B and model T, each gauge provides the user with increasing functionality – from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication.
Integral gauges are ideal for single handed operation as the wide footprint of the internal probe provides greater stability during surface profile analysis – allowing for consistent, repeatable and accurate results.
Snatch blocks
Snatch Block with Shackle are available in the following sizes – 2t/Sheave diameter 3in, 4t/sheave diameter 4.5in, 8t/sheave diameter 6in 12t/sheave diameter 6in, 15t/sheave diameter 15t/sheave diameter 10in, 15t/sheave diameter 12in, 20t/sheave diameter 8in, 20t/sheave diameter 10in, 20t/sheave diameter 12in.
Beam Clamps
Beam clamp with internal M8 thread. Made of galvanised steel. Mouth width 0-23mm. For attaching prisms to lattice towers, T-beams, sheet piles where drilling is not permitted.
Wire Rope Grease Spray
Abro lithium Grease 454g is a multi-purpose heavy-duty automotive, industrial and agricultural grease made from lithium soap, quality base oils, and rust and oxidation inhibitor. Grease coloured,It has excellent water resistance with a typicl dropping point of 356F. Ideal for passenger cars, trucks, boat trailers and other recreational vehicles. It offers maximum protection for wheel bearings, suspension points, ball joints, universal joints, steering, linkages and chasis.
Characteristics:
Lubricates Chassis Points, Wheel Bearings, and Ball Joints
Reduces Friction and Premature Wear
Protects Against Rust and Corrosion
Air Oil Pump
Air Oil Pump
Suitable for the following media:
Fuel Oil,
Diesel Fuel,





















