Disposable Nose Mask 3M
- enhanced performance
- P2 class
- protects against dust
Related Products
Elbow
Heavily used within the plumbing industry, water and gas will flow through in a tightly sealed construction. These 90 degree elbow fittings are made from a durable 316 stainless steel to ensure a simple and secure connection for pipe and hose work. All models are highly reliable and excellent quality.
Reducer Nipples 2” X 3″
- Combination (KC) Nipple Fitting Reducer
- 2″ Hose Shank x 3″ Male NPT Threads
- Made of 304 Stainless Steel
Shackles 1/2, 5/8, 3/4
Minimum safety factor: 6
Heat treatment: hardening and tempering.
Traceability code on both pin and body.
Laboratory tests:
Chemical analysis.
Metallographic analysis.
Tensile test.
Fatigue test (min. 20,000 cycles).
Proof load test (2 x WLL).
Expansion Joint 6”
ominal Size: 6″ID x 6″ OAL
Flange: 6″ 150 lb floating
Face to Face Dimension: 6″
Lateral Deflection: (+/- 1/2″)
Axial Extension: ½”
Axial Compression: ¾”
Angular Deflection: 9 degrees
Working Pressure: 225 psig
Maximum Vacuum: 26″ Hgg
Temperature Range: 20 to 250°F
Body Construction: EPDM
Equal Tee joints 2”
This fitting has a nominal bore of 2″ or 50mm and the overall fitting diameter is 60mm.
When installing threaded pipe the joint should be made using a suitable thread
Hose Coupling 3/4″/ 1/2″ /1″
- hose joint quick connector is easy to connect and loosen, install and remove the hose.
- Very suitable for your faucet, hose, quick connector,
- Car wash water gun. Flowers, plants, lawns,
- Agricultural irrigation, villa irrigation, industrial irrigation!
- Easy installation! Rugged and durable, long service life, widely accepted by users.
Mallet Hammer 2”
Stanley 1-51-104 – Tough rubber head non-marring. Lacquered hardwood handle.
DESCRIPTION
Tough Rubber Head Non-Marring
Lacquered Hardwood Handle
- Handle material: Synthetic
- Head diameter (mm): 60
- Head material: Rubber
- Head weight (g): 510
Weco Union
Unions are all steel constructed including precisely manufactured ball-cone (male-to-female) seats.
Nuts, Bolts and Washers
set available in:
10mm, 12mm, 14mm, 16mm, 20mm, 25mm and 30mm,
25mm, ETC.
Hose Clamps 3”
Various sizes of Stainless steel hose clamp .
Recently Viewed
Shackles 1/2, 5/8, 3/4
Minimum safety factor: 6
Heat treatment: hardening and tempering.
Traceability code on both pin and body.
Laboratory tests:
Chemical analysis.
Metallographic analysis.
Tensile test.
Fatigue test (min. 20,000 cycles).
Proof load test (2 x WLL).
Welding Blanket 1M X 50M
600 °C glass fibre welding blanket weighing 710 g/m.
Fire retardant PU-coating with aluminium pigments to increase anti-slip properties and resistance to fraying.
Kp-50 Scaling Machine Electric Portable Electrical Deck Scaler
Name:Electric Scaling Machine KP-50
-Protects motor from overheating and costly replacements
BRAND : KENPO
MODEL : KP-50
Volt:220V 50/60HZ / 110V 60HZ
Size:100mm/125mm/150mm/180mm
Sturdy, lightweight, portable electric rust remover is suitable for continuous heavy rust removal, especially effective for removing rust, scratches and old paint oxide on irregular surfaces that can not be removed by even large-scale derusting equipment. The electric rust remover is equipped with a 3-meter soft shaft and universal casters are installed to facilitate the fast movement of the machine to adjust the working position!
FPU Multifunctional Inflation Tool Nitrogen Gas Regulator
7 In 1 Inflatable Tool
Inflatable Tools Are Special Tools For Accumulators To Inflate, Plenum, Adjust Air Pressure And Check Inflation Pressure.
It Has Compact Structure, Easy To Use, Safe And Reliable, And Is Resistant To High Pressure And Impact.
Fluke 59 MAX+ Compact Infrared Thermometer
- Accuracy: 2.0 degree f; 1.5 percent of reading or 3.0 degree f, whichever is greater, above 86 degree and from 50 degree to 14 degree f
- Battery: 9V battery (1)
- Display type: lcd
- Distance to target size ratio (d: s): 10: 1
- Emissivity: adjustable
Oil filter Wrench 12”
- 11 3/4 inch Handle
- 17 inch strap length 1/2″ inch width
- 2 inch pipe Capacity
- 3 1/2″ inch O.D. tube Capacity
- Best for polished pipe
Enerpac Hydraulic Pumps
Enerpac high-pressure, two-speed lightweight hydraulic hand pump is for lifting, bolting, or applying pressure in construction, manufacturing, and maintenance and repair applications. The nylon-covered aluminum base, glass-filled nylon reservoir, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The hand pump has a pressure rating of 10,000 pounds per square inch (psi) and an internal pressure relief valve that protects against overloading the pump. The two-speed operation requires up to 78% fewer handle strokes than single-speed hydraulic hand pumps, and the handle locks into place for secure transport. The pump has a 3/8″ National Pipe Taper (NPT) threads port for connecting to a hose or gauge (sold separately).
High Clemco Inner Lens 04367
The High Clemco Inner Lens 04367 offers unmatched durability and crystal-clear protection for your blast helmet. Designed for professionals, it ensures safety and enhanced visibility during abrasive blasting tasks.
High Clemco Inner Lens 04367 Nigeria
Clemco inner lens Rivers State
Blast helmet replacement lens Port Harcourt
Durable protective lens Nigeria
Full Body Harness Belts
Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. Energy absorption system with 30mm Polymide webbing and PVC container case reduces the force of impact during fall. Each of our products is Individually inspected.
Lightweight and Comfortable: Our roofers safety harness fits a weight range of 130-310lbs. It was felt light and comfortable without being restrictive when you keep focusing on your working safety at height. You can wear it all day long.
Fluke infrared thermometer 568
#06343 – Handy device for measuring the temperature of hard-to-reach, live or dangerously hot robjects. It also provides the possibility of contact measurement. Equipped with a laser viewfinder that allows you to track the measurement point, a graphic display and the function of recording the measurement results. The recorded data can be analyzed by using the included software.
The set includes a pyrometer, FlukeView Forms software, a USB port, a K-type probe, a portable bag and 2x AA batteries – https://www.atel-electronics.com/produkt.php?hash=06343
Dymo Rhino 5200 Label Maker
| Brand | Dymo |
| Colour | Yellow/Black |
| Model name | 5200 |
| Printer output | Monochrome |
| Item weight | 6 Grams |
| Included components | Printer Accessory |
| Style | Label maker kit |
| Print media | Labels |
| Memory storage capacity | 64 KB |



































