King Nipples 3”/2″
Related Products
Hose Coupling 3/4″/ 1/2″ /1″
- hose joint quick connector is easy to connect and loosen, install and remove the hose.
- Very suitable for your faucet, hose, quick connector,
- Car wash water gun. Flowers, plants, lawns,
- Agricultural irrigation, villa irrigation, industrial irrigation!
- Easy installation! Rugged and durable, long service life, widely accepted by users.
Elbow
Heavily used within the plumbing industry, water and gas will flow through in a tightly sealed construction. These 90 degree elbow fittings are made from a durable 316 stainless steel to ensure a simple and secure connection for pipe and hose work. All models are highly reliable and excellent quality.
Equal Tee joints 2”
This fitting has a nominal bore of 2″ or 50mm and the overall fitting diameter is 60mm.
When installing threaded pipe the joint should be made using a suitable thread
Butterfly Valves 3”
Ductile Iron, ASTM A395 Gr. 60-40-18
Disc: 304 Stainless Steel, ASTM A351 Gr. CF8M
Seat: Resilient, EPDM seat
Shackles 1/2, 5/8, 3/4
Minimum safety factor: 6
Heat treatment: hardening and tempering.
Traceability code on both pin and body.
Laboratory tests:
Chemical analysis.
Metallographic analysis.
Tensile test.
Fatigue test (min. 20,000 cycles).
Proof load test (2 x WLL).
Various Valves
We are dealer, stockist, supplier & distributor of a comprehensive range of industrial valves in Nigeria.
Gate Valves
Globe Valves
Knife Gate Valves
Needle Valves
Etc.
Weco Union 4”
| Manufacturing Process: | Forging |
|---|---|
| Surface Treatment: | Sand Blast |
| Operation Pressure: | High Pressure |
| Material: | Alloy |
Nuts, Bolts and Washers
set available in:
10mm, 12mm, 14mm, 16mm, 20mm, 25mm and 30mm,
25mm, ETC.
Hose Clamps 3”
Various sizes of Stainless steel hose clamp .
Recently Viewed
Gangway / Cargo Net 2.5X3M
Nylon/PE/PP/Polyester/Plastic/Knotless/Knotted Scaffold/Scaffolding/Building Construction/Debris/Trailer Cargo/Sports/Playground/Anti Falling Safety Catch Net
Hollow Punch 1-4inches
- The single hole puncher can accurately align the punching position and is easy to use with light pressure.
- The handheld hole puncher can punch up to 20 sheets at a time, 1/4 inch hole, the handle is ergonomically designed, it is convenient and comfortable to operate, the punching is labor-saving.
- The hole puncher made of metal structure with plastic handle, strong penetrating power, durable. It is very small and exquisite, easily lock it and make it more compact for convenient storage in drawers.
- With non-slip rubber bottom pad that will not slide during operation, and can hold punched scraps, which can protect your desk surface from scratching and keep it tidy.
- Ideal for punching through any kind of paper, chipboard, card-stock, leather, thin metal, art project or other materials. Suitable for use at home, office, school, and so on.
CRC 2-26/3-36
CRC 2-26/3-36
CRC 2-26/3-36 Multi-Purpose Lubricant & Corrosion Inhibitor is dedicated to effectively lubricating and protecting various machine assemblies, machined surfaces, casting, weld rods, fixtures, finished welds, aluminum extrusions, and frozen joints against corrosion, oil, and grease. The multi-purpose corrosion inhibitor creates a thin layer of lubricant on different metal objects, joints, equipment, and tools to protect them against corrosion. This corrosion prevention lubricant stop squeaks, protects all metals, and displaces moisture.
Oxygen/Acetylene Regulator
Oxygen Regulator: Inlet Pressure Range: 4000 psi- Outlet Pressure Range: 200 psi- External Self Reseating Relief Valve- CGA-540 Inlet Connection- Acetylene Regulator: Inlet Pressure Range: 400 psi- Outlet Pressure Range: 30 psi- CGA-510 Inlet Connection- Features: Heavy Duty- High Capacity- Solid Brass Body- Stainless Steel Diaphragm- “B” Fitting (9/16″ – 18) Outlet Connection.
Tig Agon Arc Welding Torch Head Water Cooled
Welding Output AC/DC 100% Duty Cycle 315Amp on AC & 450Amp on DC
Length 4 Metre
Collet Sizes 1.6 2.4 3.2 & 4.0mm
The TIG welding torch is high temperature resistant and fire-resistant.
The high quality denim cover is durable, which can effectively prevent the torch from damage.
Easy to operate, superior performance.
Ergonomic design make it comfortable to hold, labor-saving.
Perfect for WP18 TIG welder.
Teflon Bar 2” x 1M/ 3” x 1M
| Material: | PTFE |
|---|---|
| Kind: | Plastic Bar |
| Water Absorption: | <0.01% |
| Contraction Percentage: | <0.4% |
| Tensile Strength: | (30~40)MPa, 20-30MPa |
| Color: | White, Black |
Hi-Lo Gauge
- Measures Internal alignment of pip after fit-up/alignment
- Measures Internal Misalignment of pipe before and after tacking
- Measurement scale both Inch and Metric Solid Stainless Steel, Rust free, Sturdy with Caring case and User Manual
- Measure Bevel on end Preparation Measure Scribe Line, Socket welds
- Measure the crown Height of welds Measure Fillet weld size
Electric Winches 1/2 Ton
Electric Winches 1/2 Ton
The Product We Produced Is In Compliance With The Nationalstandard.
2) The Design Is Reasonable
3) The Materials Are Of Good Quality,
4) The Structure Is Advanced.
5) The Appearance Is Beautiful And The Size Is Compact.
Graco 246240 Silver Plus Airless Spray Gun
The Graco 246240 Silver Plus Airless Spray Gun offers unmatched performance and durability for professional and DIY spraying projects. Lightweight, ergonomic, and built to last, it ensures precise finishes on various surfaces, making it perfect for residential, commercial, and industrial applications.
Orion Safety Flare Gun
- 12-Gauge Safety Launcher – hammer safety lock, corrosion-resistant with lifetime warranty.
- Bandolier – holds up to 6 high-performance signals
- 4, 12-Gauge HP Red Aerial Flares –USCG approved day or nighttime signal, altitude up to 500 feet, brightness up to 16,000 candela, burn time up to 7 seconds each.
Stainless Steel Polish Spray
Polishes and protects all stainless steel surfaces in one step
The spray clings to vertical surfaces and leaves a light, non-greasy film that resist fingerprints and marking
Does not contain harmful chemicals and is safe to use in food preparation areas
Teflon Sheet 0.5mm – 6mm 1msq
SPECIFICATION
| Item | Thickness | Length& Width |
| Molded sheet | 3~~100 mm | Length*Width 300*300 mm——2000*2000 mm |
| Skived sheet | 0.2~~6.5 mm | Width 100—2700 mm Length: by roll |
| PTFE sheet | 1/64~1/4 | 48*48 , 60*60 |
Wet Film Thickness Meter
- In this welding gauge kit, it include a pack of wet film comb, a pack of wire metal sheet thickness gauge, and a pack of dual-sided wire cable sheet gauge total 3 pack. They are well packed in a plastic box, easy for carry and store.
- High Quality: All the welding gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust.
Lifting Belt 2×3/3×4/5×5
polyester lifting belts are continuous loops made by connecting the ends of the webbing to the joint pads. They are extremely versatile as the design allows for rotation of bearing points, avoiding one constant bearing point and thereby increasing useful life. They are ideal for use with all three bindings vertical, horizontal and chokers. Polyester harnesses are renowned for their versatility, weight, strength and non-slip material. crane lifting belts are made from industry grade polyester which is more durable an

































