Electric Winches 1/2 Ton
Electric Winches 1/2 Ton
Electric Winches 1/2 Ton
The Product We Produced Is In Compliance With The Nationalstandard.
2) The Design Is Reasonable
3) The Materials Are Of Good Quality,
4) The Structure Is Advanced.
5) The Appearance Is Beautiful And The Size Is Compact.
Related Products
Tubing Bender 1”
With 2 speeds pump
- Capacity: 10 tons N
- Dies: 1/2″ 3/4″ 1″ 1-1/4″ 1-1/2″ 2″gas
- Packaging type: Wooden case
Lifting Clamps
Cam safety lock for easier steel sheet insertion and safe gripping.
Identification plate with serial number and batch number.
Safety factor: 3:1.
Minimum WLL is 10% of maximum WLL.
Lifting Belt 2×3/3×4/5×5
polyester lifting belts are continuous loops made by connecting the ends of the webbing to the joint pads. They are extremely versatile as the design allows for rotation of bearing points, avoiding one constant bearing point and thereby increasing useful life. They are ideal for use with all three bindings vertical, horizontal and chokers. Polyester harnesses are renowned for their versatility, weight, strength and non-slip material. crane lifting belts are made from industry grade polyester which is more durable an
Shackles
Hot-dip galvanised steel shackle
Safe working load up to 55 tonnes (tested and certified)
Corrosion-resistant
Meets performance requirements of US Federal PR-C-271
Conforms to EN 13889 standards
Timber Jack 3 Ton
Timber Jack is a versatile support that can support up to 30,000 lbs. Fasten it to the end of a 4×4 or 6×6 piece of lumber to create a shore with 5″ of adjustment. The low cost and high load capacity of the Timber Jack ranks it as having the best value
Hydraulic Wire Rope Cutter
This cutter can cut steel core aluminum stranded wire ≤ φ18MM, copper and aluminum cable ≤ φ20MM, wire rope ≤ φ20MM.
Semi Automatic Horizontal Drum Tongs
Capacity of up to 500Kgs.
Manufactured to BS EN 13155:2003 standards.
- Tong is made to lift drums with an overhead hoist with ease
- Ideal for open or closed head steel, fiber drums with ring
- Release lever allows hooks to fall and locate under both rims
- Hook engages as it’s lifted and disengages as drum is set down
Hydraulic Pullers 20 Ton
Comfort: self-gripping legs by return spring. The puller stays in position on the bearing even when not in tension.
• Safety: power is limited hydraulically by the pump. No risk of breakage.
• 1 hollow jack UWG.320 fitted with the screw UWG.320H01.
• Use with 700-bar pump UWP.10M.
• Mounting with 3 legs only with the hydraulic jack.
Turn Buckles
Turnbuckles in various diameters and variations including:
Galvanised & Stainless Steel
Eye & Eye
Hook & Hook
Hook & Eye
Hydraulic Pipe Benders up to 2”
The bender is applicable for bending steel pipes up to 90 degree.
It features simple operation, long service life and smooth round bends.
16t hydraulic pipe bending machine, pipe bender, for 1/2″ – 2″ round pipes, SWG2J – 02159
This hydraulic pipe bending machine is suitable for different types of round pipes
Operated manually by 2-stage hydraulic hand pump.
This machine enables exact pipe bending of round pipes.
This tool stands on 3 swivel castors
Self Locking Drum Lifter
For lifting 30 gallon plastic drums. Keeps drum vertical while in use. Works well with overhead hoist or forklift hook attachment.
Capacity of up to 500Kgs.
Manufactured to BS EN 13155:2003 standards.
Recently Viewed
Graco 246240 Silver Plus Airless Spray Gun
The Graco 246240 Silver Plus Airless Spray Gun offers unmatched performance and durability for professional and DIY spraying projects. Lightweight, ergonomic, and built to last, it ensures precise finishes on various surfaces, making it perfect for residential, commercial, and industrial applications.
Orion Safety Flare Gun
- 12-Gauge Safety Launcher – hammer safety lock, corrosion-resistant with lifetime warranty.
- Bandolier – holds up to 6 high-performance signals
- 4, 12-Gauge HP Red Aerial Flares –USCG approved day or nighttime signal, altitude up to 500 feet, brightness up to 16,000 candela, burn time up to 7 seconds each.
Stainless Steel Polish Spray
Polishes and protects all stainless steel surfaces in one step
The spray clings to vertical surfaces and leaves a light, non-greasy film that resist fingerprints and marking
Does not contain harmful chemicals and is safe to use in food preparation areas
Teflon Sheet 0.5mm – 6mm 1msq
SPECIFICATION
| Item | Thickness | Length& Width |
| Molded sheet | 3~~100 mm | Length*Width 300*300 mm——2000*2000 mm |
| Skived sheet | 0.2~~6.5 mm | Width 100—2700 mm Length: by roll |
| PTFE sheet | 1/64~1/4 | 48*48 , 60*60 |
Wet Film Thickness Meter
- In this welding gauge kit, it include a pack of wet film comb, a pack of wire metal sheet thickness gauge, and a pack of dual-sided wire cable sheet gauge total 3 pack. They are well packed in a plastic box, easy for carry and store.
- High Quality: All the welding gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust.
Lifting Belt 2×3/3×4/5×5
polyester lifting belts are continuous loops made by connecting the ends of the webbing to the joint pads. They are extremely versatile as the design allows for rotation of bearing points, avoiding one constant bearing point and thereby increasing useful life. They are ideal for use with all three bindings vertical, horizontal and chokers. Polyester harnesses are renowned for their versatility, weight, strength and non-slip material. crane lifting belts are made from industry grade polyester which is more durable an
Sledge Hammer Steel 8kg
Special non sparking and anti-magnetic Copper-Beryllium alloy.
• For safety purposes,they uses wooden handles to prevent any risk of sparks. This is not the case of certain bi-material plastic handles.
• To avoid any risk of sparks, the design of the hammer heads is specific, without sharp edges.
Hack Saw Frame
|
Type of tool
|
hacksaw | |
|
Tools application
|
for fretsaw blades | |
|
Tools features
|
“Ergo” design | |
|
Kit contents
|
blade |
Full Body Harness Belts -Camp Safety
A simplified version of Camp Safety’s GT harness equipped with non-openable auto-locking buckles on the leg loops for fast, easy, secure adjustment. GT construction follows the findings of their “SOSPESI” research program which gave them new insights on suspension trauma. The padding uses variable thicknesses and stiffness to provide the right amount of support and comfort for every part of the body. Ventral attachment features two loops: the upper loop is for attaching a chest harness and chest ascender and the lower loop holds the ventral D-ring for attaching lanyards and rope tools. 5 aluminum alloy
Hydraulic Cylinder Jacks 10 Ton
Enerpac RC-101 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity. This reliable hydraulic cylinder is perfect for all your heavy-duty lifting and pressing needs. With a single acting design, this cylinder provides smooth and precise operation.
The spring return feature ensures quick retraction, saving you time and effort. The 1-inch stroke allows for efficient lifting or pressing in various applications. The Enerpac RC-101 hydraulic cylinder boasts a 10-ton capacity, making it ideal for industrial, construction, and automotive use.
Reducer Nipples 2” X 3″
- Combination (KC) Nipple Fitting Reducer
- 2″ Hose Shank x 3″ Male NPT Threads
- Made of 304 Stainless Steel
Tap and Die set 3-12mm
Each selection includes sets of two taps per dimension: taper and bottoming.































