- 600A AC current measurement with fixed Jaw
- 600V AC and DC voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Resistance measurement to 6000ohm with continuity detection
- 1000µF capacitance measurement
- Signal processing allows for use in noisy electrical environments while providing stable readings
- Large, easy to read, backlight display automatically sets the correct measurement range
- CAT IV 300V, CAT III 600V safety rating
FLuke 373 Clamp Meter
Related Products
Digital Humidity Gauge -Terminator
- Brand: Terminator
- Description: Indoor and Outdoor Temperature and Hygrometer With Clock 4in1
FPU Multifunctional Inflation Tool Nitrogen Gas Regulator
7 In 1 Inflatable Tool
Inflatable Tools Are Special Tools For Accumulators To Inflate, Plenum, Adjust Air Pressure And Check Inflation Pressure.
It Has Compact Structure, Easy To Use, Safe And Reliable, And Is Resistant To High Pressure And Impact.
Fluke Insulation tester 1555
The Fluke 1555 insulation resistance testers offer digital insulation testing up to 10kV, making it ideal for testing a wide range of high voltage equipment including switch gear, motors, generators and cables. Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating. With measurement storage and PC interface, the 1555 are perfect tools for preventative or predictive maintenance programs designed to identify potential equipment failures before they occur.
Marlin Spike
No sparking, non-magnetic professional tool.
- g: 916
- L mm: 406
Fluke infrared thermometer 568
#06343 – Handy device for measuring the temperature of hard-to-reach, live or dangerously hot robjects. It also provides the possibility of contact measurement. Equipped with a laser viewfinder that allows you to track the measurement point, a graphic display and the function of recording the measurement results. The recorded data can be analyzed by using the included software.
The set includes a pyrometer, FlukeView Forms software, a USB port, a K-type probe, a portable bag and 2x AA batteries – https://www.atel-electronics.com/produkt.php?hash=06343
Clamp Meter Fluke 323
The Fluke 323 is best suited for current measurements up to 400A in confined cable locations.
When measuring current the Fluke 323 clamp meter ensures that you can carry out your measurements without damaging the circuit thanks to the integrated jaws. Simply clamp the jaws around the conductor you are testing and the 323 will provide an accurate reading of AC current instantly. To ensure further measurements are accurate as possible on irregular loads the 323 comes with true RMS technology that enhances the readings taken. AC current – range of 400A
- AC voltage – range of 600V
- DC voltage – range of 600V
- Resistance – ranges of 400Ω and 4000Ω
- Continuity – range of <70Ω
Striking Wrench Set
| Type Of Spanner | Various Ended Spanner |
| Material | Carbon Steel |
| Measurement System | Metric |
| Usage/Application | Industrial |
Hydraulic Test Gauge
A Hydraulic Test Gauge is a device that measures and displays the pressure within a hydraulic system. It typically consists of a dial or digital display connected to a sensor that measures the pressure of the fluid. The gauge is used to ensure that the system is operating within safe and accurate parameters.
There are many types of hydraulic test gauges available on the market, each with different features and capabilities.
Digital Hygrometer
Monitor the relative humidity in your home, office or wherever you store your guitar to protect it from the effects of high or low moisture levels. The easy-to-read display shows temperature and humidity simultaneously and can be used freestanding on a flat surface or mounted on a wall. The Taylor hygrometer comes with built-in tilt stand, wall mounting bracket.
- Large dual-display LCD readout
- Relative humidity range: 10% – 95%
- Temperature range: -40℉ – 158℉ (-40℃ – 70℃)
- Requires 2 AAA batteries (not included)
Clamp Meter Fluke 902fc
- Multiple Compatibility — This hard travel case is compatible with Fluke 902/Fluke 902 FC/ Fluke 373/374/375/376/Fluke 376 FC Electrical Voltage, Continuity and Current Tester.
- Super Materials — Instead of using the cheap materials, our case using the high quality and eco-friendly materials to prevent your fluke tester from the horrible smell. The outside covers is the nice 1680D fabric and the lining using the high-density EVA,which make it sturdy and durable.
Digital Surface Profile Gauge Weld-Tech
The Elcometer 224 integral profile gauge provides the very latest in surface profile measuring technology for measuring profile on flat surfaces. Fast, accurate and very user friendly, the Elcometer 224 is available with or without memory and Bluetooth®.
Available in two different models, model B and model T, each gauge provides the user with increasing functionality – from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication.
Integral gauges are ideal for single handed operation as the wide footprint of the internal probe provides greater stability during surface profile analysis – allowing for consistent, repeatable and accurate results.
Recently Viewed
Devcon Putty Aluminium
- Repairs air conditioning system components
- Listed under NSN Stock #8030-00-051-4511; #8030-00-670-8553
- Bonds to aluminum and many other metals
- Fills porosity in aluminum castings
- Can be machined drilled or tapped using conventional metalworking tools
- Qualifies under Mil Spec MIL-PRF-24176C, Type II
- Open Time: 60 Minutes
- Gap Fill: 0.0625″ – 0.75″
Multipurpose Grease
Good oxidation stability
• Extreme worked penetration
• High pressure resistance
• Water resistant up to 90°C
• Good protection against corrosion
• Adheres well
Welding Torch
designed to be used on equal-pressure gases. Acetylene and hydrogen may be used for lead burning, acetylene is preferable when welding thin sections of mild steel, aluminium and zinc. Suitable for electrical and electronics engineers, jewellery working, dental composition and repairs, instrumentation, heating and ventilation and light fabrication.
Hydraulic Nut Splitters
Enerpac NC-2432 nut splitter has a 15-ton capacity and a single-acting, spring return cylinder for removing hexagon nuts and bolts. It has an angled head for optimum cutting and splits hexagon nuts ranging from 0.94 to 1.13 inches in diameter and cuts bolts ranging from 0.63 to 0.88 inches in diameter. It includes a spare chisel and set screw and a wrench for securing the chisel. The chisel is can be reground for extended use. This nut splitter is suitable for service trucks, piping industry, tank cleaning, petrochemical, steel construction, and mining, among other applications. Maximum allowable hardness to split is HRc-44. Not to be used on square nuts.
Safety Goggle
Wide angle for improved visibility
Polycarbonate anti-mist lens
Wide elastic headband for added comfort
Integral moulded vent for protection
Against dust, liquid splashes, moulton
Metal and hot solid protection
Conforms to en 166: 1b.3.4.9
Measuring Tapes 30m
Stanley 0-34-108 – High impact ABS case
Steel tape protected by abrasion resistant polymer coating
Articulated arm for quick rewinding of tap
High Impact Yellow Abs Case For Strength
And Visibility
Steel Tape Protected By Abrasion Resistant
Polymer Coating
Folding Crank For Storage
Articulated Arm For Quick Rewinding Of Tap Protective Hook Stores Conveniently In The
Case
Kimtech Prep Kimtex Cleaning Wiper is a cleaning product that comes in a brag box packaging. It has a length of 16.8 inches and a width of 12.1 inches. The wiper is made of meltblown material and is blue in color. It contains 180 sheets and is acid, base, and solvent resistant. It is ideal for cleaning grease and oil off of tools and surfaces, making cleaning and prepping easy. The wiper is also very absorbent and can be used for furniture finishing by hand, engine assembly/repair, appliance assembly, and glass or window cleaning.
Measuring Tapes
Long Tape Measure features a blade-release button and a 5-to-1 gear ratio for fast blade rewinds for efficiency. The long tape’s stainless-steel crank arm provides durability for demanding job-sites. A spring-loaded carabiner attachment offers great portability.
Speedometer Digital Mastech
- Universal: DC 9‑32V, GPS tachometer is applicable to RV, yacht, fishing boat, ship, motorcycle, automobile modification and other fields.
- Advantages: GPS speedometer has the advantages of high accuracy, fast position confirmation, short starting time, low power consumption and long service life.
- Colorful Backlit: Digital Speedometer Designed with 7 colors backlit, red, yellow, orange, green, blue, purple, white, can be freely adjusted, which is convenient for night use.
- Multi Functional: 85mm GPS tachometer, the single mileage, total mileage and COG trip functions are clearly displayed on the display screen.
- Waterproof and Antifog: GPS speedometer is made of stainless steel 316L frame and anti fog glass. Waterproof and dustproof, with polarity protection and anti fog performance.
Argon Cap
- Package quantity:5 piece 57Y02 Long Back Cap TIG Back Cap, Whole Length :118mm/4.65inch, Diameter: 3/8inch /32mm
- provide a good welding performance, gives welders an comfortable feeling during the welding job.
- precise made makes it combined very well to machine.100% brand new and high quality Durable and reliable to use
- This kit fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches,DB18 and DB 26 torches.
- 4. The Brand of Machine would be Rilon, Riland, Jasic, Mitech, Chiry, UNT, Krypton, Longetivity, Berlan and so on .
Jet Chisel Guns
For chiseling or smoothing welds, castings and other materials
2. Adjust to the contour of any surface automatically
3. The chisel can reach into corners, cuivatures, and uneven surfaces, making it a tool no shop should be without.
4. A short hose and quick coupler are attached as standard accessories.
Work Vest
This classic vest uses our highly innovative triple technology Glowtex function.
Offering advanced visibility by combining fluorescent fabric, HiVisTex reflective tape and Glowtex phosphorescence tape which glows in the dark.
Suitable for day, night and zero light conditions.
Wypall 34015
Kimberly-Clark 34015 WYPALL* X60 Wipers are White Teri-Reinforced Wipers in BRAG* Box. Extra-tough WYPAll* Teri X60 Wipers bring the absorbing power of HYDROKNIT technology to a lighter weight wiper. WYPALL Teri X60 Wipers set a higher standard for general purpose wipers. No adhesives or binders, these wipes leave nothing behind. Re-inforced for extra scrubbing and cleaning power. Tough enough for big jobs and soft enough for the face, hands and personal use. Ideal scrap rag replacement. Sold by the box.
Features:
- Wiper Size: 12 1/2″ x 16 4/5″
- Color: White
- Wiper Material: Nylon
- 180 Wipers per box
- 1 Box per case












































