Contains prime grade zinc and formulated with 50% metallic zinc, meeting the metallic zinc requirements
Drill Colar Grease
Non-plating
Low sulfur content
Non-reactive
Brushable over a wide temperature range
Consistent rig floor makeup
Resistant to further downhole makeup
Sticks to wet joints
Non-reactive
Be the first to review “Drill Colar Grease” Cancel reply
Related Products
Devcon Putty Aluminium
- Repairs air conditioning system components
- Listed under NSN Stock #8030-00-051-4511; #8030-00-670-8553
- Bonds to aluminum and many other metals
- Fills porosity in aluminum castings
- Can be machined drilled or tapped using conventional metalworking tools
- Qualifies under Mil Spec MIL-PRF-24176C, Type II
- Open Time: 60 Minutes
- Gap Fill: 0.0625″ – 0.75″
Metal Brite 25 Liter
- Does not contain nonyl phenol ethoxylates or other estrogenic compounds
- Non-flammable
- Surface brightening
Benefits
- Prevents flash rusting
- Surfaces rendered suitable for painting
Multipurpose Grease
Good oxidation stability
• Extreme worked penetration
• High pressure resistance
• Water resistant up to 90°C
• Good protection against corrosion
• Adheres well
Teflon Bar 2” x 1M/ 3” x 1M
| Material: | PTFE |
|---|---|
| Kind: | Plastic Bar |
| Water Absorption: | <0.01% |
| Contraction Percentage: | <0.4% |
| Tensile Strength: | (30~40)MPa, 20-30MPa |
| Color: | White, Black |
Grinding Paste
- Both coarse and fine paste in one container.
- Specially adapted for grinding auto valves.
- Easy to use
Abro grinding paste has Both coarse and fine paste in one container. Specially adapted for grinding auto valves. Easy to use
Devcon Putty A
Devcon Plastic Steel Putty A is the original metal filled epoxy putty for economical, dependable maintenance and repair work. In a 1 KG size, this product is also known as Devcon 10115.
Devcon plastic steel putty is recommended for repairing cracks and breaks in equipment, machinery or castings, along with patching and rebuilding blow holes or pits in castings. Plastic Steel Putty will rebuild worn equipment, pumps and valve bodies and restore bearing journals and races.
Silicone Sealant
Silicone Sealant
Abro 2000 silicone sealant can be used to meet a variety of caulking needs, it’s adhesive to glass, wood, metal, porcelain, ceramic, painted surface, and rubber.
It can be available is clear, black and white.
It is also used to cut gasket or any dressing.
It is typically applied in sealing panels window plates or on high-temperature equipment like oven doors.
The unit is 310g
CRC Contact cleaner
Industries Contact Cleaner 2000 Contact Cleaner
Drum of Environ Clean 25 Liter
Unitor™ Enviroclean™ is highly concentrated, low toxic, biodegradable and safe to use. It is based on powerful fatty acid derivates linked with an advanced surfactant formulation.
The main applications are for cleaning and degreasing in the engine room, deck cleaning and for general removal of grease, oil, sludge, polymer compounds, carbon deposits, dirt and grime.
Belt Dresser
Food Grade Belt Dressing to extend the life of drive belts by improving traction & allowing runs under reduced belt tension.
Recently Viewed
Devcon Putty A
Devcon Plastic Steel Putty A is the original metal filled epoxy putty for economical, dependable maintenance and repair work. In a 1 KG size, this product is also known as Devcon 10115.
Devcon plastic steel putty is recommended for repairing cracks and breaks in equipment, machinery or castings, along with patching and rebuilding blow holes or pits in castings. Plastic Steel Putty will rebuild worn equipment, pumps and valve bodies and restore bearing journals and races.
Adjustable Drum Lifter
Adjustable Drum Lifter for plastic or steel drums.
Capacity of up to 360Kgs.
Manufactured to BS EN 13155:2003 standards.
Cutting Stones
Reliable Cuts in Concrete.
Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete.
Optimised diamond matrix delivers solid results thanks to the disc’s high-quality standards.
Bosch´s diamond competence centre in Switzerland ensures consistent quality.
Hydraulic Test Gauge
A Hydraulic Test Gauge is a device that measures and displays the pressure within a hydraulic system. It typically consists of a dial or digital display connected to a sensor that measures the pressure of the fluid. The gauge is used to ensure that the system is operating within safe and accurate parameters.
There are many types of hydraulic test gauges available on the market, each with different features and capabilities.
Clamp Meter Fluke 323
The Fluke 323 is best suited for current measurements up to 400A in confined cable locations.
When measuring current the Fluke 323 clamp meter ensures that you can carry out your measurements without damaging the circuit thanks to the integrated jaws. Simply clamp the jaws around the conductor you are testing and the 323 will provide an accurate reading of AC current instantly. To ensure further measurements are accurate as possible on irregular loads the 323 comes with true RMS technology that enhances the readings taken. AC current – range of 400A
- AC voltage – range of 600V
- DC voltage – range of 600V
- Resistance – ranges of 400Ω and 4000Ω
- Continuity – range of <70Ω
Clamp Meter Fluke374
- Log and trend measurements, and pinpoint intermittent faults
- Capture measurements outside the arc flash zone with Bluetooth connectivity to your Apple or Android devices
- Transmit results wirelessly via Fluke Connect Measurements app
- Cat IV 600 V, cat III 1000 Volts
Filing Machines
Light and compact for optimum handling
> Revolving gear head enables optimized adaptation to every work situation
> Powerful 2100 watt motor
> The lightweight and compact tool
Various Valves
We are dealer, stockist, supplier & distributor of a comprehensive range of industrial valves in Nigeria.
Gate Valves
Globe Valves
Knife Gate Valves
Needle Valves
Etc.
Expansion Joint 6”
ominal Size: 6″ID x 6″ OAL
Flange: 6″ 150 lb floating
Face to Face Dimension: 6″
Lateral Deflection: (+/- 1/2″)
Axial Extension: ½”
Axial Compression: ¾”
Angular Deflection: 9 degrees
Working Pressure: 225 psig
Maximum Vacuum: 26″ Hgg
Temperature Range: 20 to 250°F
Body Construction: EPDM
Weco Union 4”
| Manufacturing Process: | Forging |
|---|---|
| Surface Treatment: | Sand Blast |
| Operation Pressure: | High Pressure |
| Material: | Alloy |
Complete Tool kits for Mechanical, Electrical
Various tools and accessories made of chrome vanadium steel alloy.
Durable case with ergonomic handle.
Practical and functional resistant suitcase with ergonomic handle for easy transport.
Inside there are 88 tools and accessories made with high quality materials to be durable and resistant.
The case with tools and accessories is ideal for both advanced hobbyists and craftsmen.
This set of tools is a small, portable, light and practical to carry workshop that will allow you to carry out any type of work.









































There are no reviews yet.