For lifting 35 or 55 gallon steel and plastic drums. Easily transports and handles open or closed steel drums. Allows quick, gentle loading into over packs and keeps drums upright during lift, reducing spills and injuries.
Adjustable Drum Lifter
Adjustable Drum Lifter for plastic or steel drums.
Capacity of up to 360Kgs.
Manufactured to BS EN 13155:2003 standards.
Be the first to review “Adjustable Drum Lifter” Cancel reply
Related Products
Tirfor Jack
developed for daily heavy-duty applications under the most extreme circumstances. The hoist is a versatile and portable multi-purpose manual hoist for lifting, pulling, and positioning device.
Full Body Harness Belts -Camp Safety
A simplified version of Camp Safety’s GT harness equipped with non-openable auto-locking buckles on the leg loops for fast, easy, secure adjustment. GT construction follows the findings of their “SOSPESI” research program which gave them new insights on suspension trauma. The padding uses variable thicknesses and stiffness to provide the right amount of support and comfort for every part of the body. Ventral attachment features two loops: the upper loop is for attaching a chest harness and chest ascender and the lower loop holds the ventral D-ring for attaching lanyards and rope tools. 5 aluminum alloy
Shackles
Hot-dip galvanised steel shackle
Safe working load up to 55 tonnes (tested and certified)
Corrosion-resistant
Meets performance requirements of US Federal PR-C-271
Conforms to EN 13889 standards
Timber Jack 3 Ton
Timber Jack is a versatile support that can support up to 30,000 lbs. Fasten it to the end of a 4×4 or 6×6 piece of lumber to create a shore with 5″ of adjustment. The low cost and high load capacity of the Timber Jack ranks it as having the best value
Hydraulic Pullers 20 Ton
Comfort: self-gripping legs by return spring. The puller stays in position on the bearing even when not in tension.
• Safety: power is limited hydraulically by the pump. No risk of breakage.
• 1 hollow jack UWG.320 fitted with the screw UWG.320H01.
• Use with 700-bar pump UWP.10M.
• Mounting with 3 legs only with the hydraulic jack.
Chain hoist
Chain hoist Various mm
Lifting: Various mm
Lifting Clamps
Cam safety lock for easier steel sheet insertion and safe gripping.
Identification plate with serial number and batch number.
Safety factor: 3:1.
Minimum WLL is 10% of maximum WLL.
Beam Clamps
Beam clamp with internal M8 thread. Made of galvanised steel. Mouth width 0-23mm. For attaching prisms to lattice towers, T-beams, sheet piles where drilling is not permitted.
Webbing Slings
Our webbing slings are made from high-quality polyester webbing to provide a lightweight, hardwearing and reliable source for your heavy duty lifting and pulling. Webbing slings are perfect for wrapping around odd-shaped loads and loads with a wide bearing surface as well. Flat webbing slings are widely used for:
- Pipe laying
- Accessing trees for tree surgeons
- Vehicle towing
- Mountain climbing
- Lifting boats
- Webbing sling drags for firefighters
Gangway / Cargo Net 2.5X3M
Nylon/PE/PP/Polyester/Plastic/Knotless/Knotted Scaffold/Scaffolding/Building Construction/Debris/Trailer Cargo/Sports/Playground/Anti Falling Safety Catch Net
Self Locking Drum Lifter
For lifting 30 gallon plastic drums. Keeps drum vertical while in use. Works well with overhead hoist or forklift hook attachment.
Capacity of up to 500Kgs.
Manufactured to BS EN 13155:2003 standards.
Air Oil Pump
Air Oil Pump
Suitable for the following media:
Fuel Oil,
Diesel Fuel,
Recently Viewed
Cutting Stones
Reliable Cuts in Concrete.
Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete.
Optimised diamond matrix delivers solid results thanks to the disc’s high-quality standards.
Bosch´s diamond competence centre in Switzerland ensures consistent quality.
Hydraulic Test Gauge
A Hydraulic Test Gauge is a device that measures and displays the pressure within a hydraulic system. It typically consists of a dial or digital display connected to a sensor that measures the pressure of the fluid. The gauge is used to ensure that the system is operating within safe and accurate parameters.
There are many types of hydraulic test gauges available on the market, each with different features and capabilities.
Clamp Meter Fluke 323
The Fluke 323 is best suited for current measurements up to 400A in confined cable locations.
When measuring current the Fluke 323 clamp meter ensures that you can carry out your measurements without damaging the circuit thanks to the integrated jaws. Simply clamp the jaws around the conductor you are testing and the 323 will provide an accurate reading of AC current instantly. To ensure further measurements are accurate as possible on irregular loads the 323 comes with true RMS technology that enhances the readings taken. AC current – range of 400A
- AC voltage – range of 600V
- DC voltage – range of 600V
- Resistance – ranges of 400Ω and 4000Ω
- Continuity – range of <70Ω
Clamp Meter Fluke374
- Log and trend measurements, and pinpoint intermittent faults
- Capture measurements outside the arc flash zone with Bluetooth connectivity to your Apple or Android devices
- Transmit results wirelessly via Fluke Connect Measurements app
- Cat IV 600 V, cat III 1000 Volts
Filing Machines
Light and compact for optimum handling
> Revolving gear head enables optimized adaptation to every work situation
> Powerful 2100 watt motor
> The lightweight and compact tool
Various Valves
We are dealer, stockist, supplier & distributor of a comprehensive range of industrial valves in Nigeria.
Gate Valves
Globe Valves
Knife Gate Valves
Needle Valves
Etc.
Expansion Joint 6”
ominal Size: 6″ID x 6″ OAL
Flange: 6″ 150 lb floating
Face to Face Dimension: 6″
Lateral Deflection: (+/- 1/2″)
Axial Extension: ½”
Axial Compression: ¾”
Angular Deflection: 9 degrees
Working Pressure: 225 psig
Maximum Vacuum: 26″ Hgg
Temperature Range: 20 to 250°F
Body Construction: EPDM
Weco Union 4”
| Manufacturing Process: | Forging |
|---|---|
| Surface Treatment: | Sand Blast |
| Operation Pressure: | High Pressure |
| Material: | Alloy |
Complete Tool kits for Mechanical, Electrical
Various tools and accessories made of chrome vanadium steel alloy.
Durable case with ergonomic handle.
Practical and functional resistant suitcase with ergonomic handle for easy transport.
Inside there are 88 tools and accessories made with high quality materials to be durable and resistant.
The case with tools and accessories is ideal for both advanced hobbyists and craftsmen.
This set of tools is a small, portable, light and practical to carry workshop that will allow you to carry out any type of work.
Airless Spray Gun
1000 ml suction hvlp spray gun with baionet lock, aluminum cup, made with cnc machine, without o-ring, with stainless steel nozzle and needle brass air cap, alum clamp and knobs, chrome plated spray gun body, male thread fitting 1/4″ hvlp = high volume, low pressure
- Capacity: 1000 cc
- Nozzle: ø 1,4mm
- Packaging type: Box
- Working pressure: 2,5 – 3 bar
Welding Cable
25mm welding cable 16mm 50mm 70mm 95mm 120mm single copper core rubber sheathed
















































There are no reviews yet.